M
ATER
I
AL
S
Double Surface
Durability
Carbodeon (Finland) has
released a new PTFE/
NanoDiamond coating with
potential to cost-effectively reduce
CO2 output and fuel demand, as well
as to improve equipment lifespan, in fields
such as the automotive, aerospace, and industrial machinery industries. Features include:
■ A liquid dispersion of 4 to 6 nm NanoDiamond particles.
■ Surface chemistry that has been specially created to integrate the particles with PTFE molecules
without the use of additional surfactants.
www.carbodeon.com
EMI Shielding Material
Leader Tech’s (Tampa, FL) low compression Conductive Foam Shielding
(CFS) materials deliver a typical
shielding effectiveness of 60 dB
between 10 MHz to 3 GHz and can
be die-cut to precise specifications.
The foam is offered in 3 standard
thicknesses and has a low-resistance
polyester fabric surface with a nick-el-copper polyurethane foam center.
Features include:
■ A compression load of 2.1 PSI at
30% compression.
■ An operational temperature range
from -40° to +156°F.
■ The availability of a conductive,
pressure sensitive adhesive to
facilitate installation.
www.leadertechinc.com
One Component
LED-Curable System
Master Bond (Hackensack, NJ)
LED403Med is a single component
system that passes the plastics test for
USP Class VI and ISO 10993-5 cytotoxici-
ty requirements. This medical grade system
withstands sterilization methods such as
gamma radiation, EtO, and various chemi-
cal sterilants.
Features include:
■ The ability to cure fully tack-free upon exposure to a 405 nm
wavelength light source.
■ Full cures that can be achieved in 15-30 seconds.
■ Dimensional stability.
■ Resistance to water, many acids, bases, and oils.
■ Serviceability from -60° to +250°F.
■ Availability for use in syringes, ½ pints, pints, quarts, gallons,
and 5 gallon pails.
www.masterbond.com/
properties/optically-clear-polymer-adhesives
Thermoplastic
Elastomers
A new family of
Sarlink thermoplastic elastomers
(TPEs) from Teknor
Apex Company
(Netherlands)
expands the range of
economic and performance alternatives available to manufacturers of sealing systems and
other automotive components. The new compounds are the first Sarlink
products to be based on styrenic TPE (TPE-S) chemistry. The four series
of compounds being introduced include:
■ High-performance extrusion compounds.
■ General-purpose extrusion compounds.
■ High-performance injection molding compounds.
4175 SW Research Way, Corvallis, Oregon 97333 U.S.A.
Tel: 800-717-3158 Web: www.unimeasure.com
Email: sales@unimeasure.com