H. G. Schaevitz LLC Alliance Sensors
Group (Moorestown, NJ) has expanded its sen-
sor product offering by adding resistive technology to its
portfolio of linear position products. LP- 22 series potenti-
ometers are suitable for applications like robotic control,
X-Y table feedback, injection molding machine slides, press
or die arm position, control valve shaft position, and mil/
aero test stands. Features include:
Full ranges from 25 to 300 mm (1 to 12”).
Self-aligning swivel rod eyes on both ends.
An environmental seal to IEC IP-64.
An operating temperature from -40° to 150°C.
A linearity better than 0.10%.
A 22 mm OD anodized aluminum housing.
A 1 m 3-conductor cable.
The ability to withstand high shocks (50 gs single hit) and
vibration ( 20 gs).
A maximum input of between 12 and 36 V DC at 12 mA or
A maximum output resistance between 1 and 5 k.
Miniature Data Recorder
DTS (Seal Beach, CA) has
announced a product that
eliminates the need for slip
rings and telemetry. The min-
iature SLICE data recorder
can be mounted directly on
the test article. For applica-
tions like measuring torque
on a drive shaft, SLICE mounts directly on the shaft next to
the strain gauges, ensuring high data quality, while eliminat-
ing issues with noise, data transfer, and fixtures. Features
A built-in microprocessor that manages a full featured
signal conditioning and storage system.
Independent excitation sources.
Variable gain amplifiers.
Adjustable sampling rates from 10 to 500k sps.
Adjustable anti-alias filters up to 40 kHz.
A 16 GB direct-write flash memory that can record high
sample rate data continuously for hours.
Modular 3-channel layers that weigh < 14 g each.
A shock rating of up to 5000 g.
Support for bridge sensors, strain gauges, IEPE sensors,
voltage inputs, and temperature sensors.
range of liquid
for measuring low
flow meter comes
in a robust housing and offers a versatile sensor solution
for applications in demanding industrial environments and
laboratory settings. Features include:
Measurements for flow rates of 0 to 40 ml/min.
A typical response time of 20 ms.
No moving parts.
Chemical resistance and biocompatibility.
USB, RS485 and analog voltage output connections.
Your Total Solution in Specialty Chemical Distribution
For Every Application...
1.800.888.0698 | ellsworth.com
DEFENSE GENERAL ASSEMBLY