Subminiature Pressure Switch
Gems Sensors & Controls (Gems) (Plainville,
CN) has announced the global market launch
of its Model PS61P OEM subminiature pressure switch, offering medium-to-high pressure
monitoring within space constrained applications.
A hardened alloy steel piston actuator for
expanded overpressure performance.
A 24 mm diameter hex footprint.
The ability to monitor standard pressures from
510 to 4350 psi ( 35 to 300 bar).
A burst pressure rating of 22,000 psi
Clippard (Cincinnati, OH) has
announced its GNV Series
Needle Valves. The new series
is available with 1/8, 1/4, and
3/8" port sizes with flow
rates of up to 60 scfm at
100 psig. Features include:
Bidirectional flow control.
A rotating input for 360°
A rugged and compact design.
Multiple mounting options.
Single-Jet Totalizing Water Meters
Clark Solutions' (Hudson, MA) new Model
Series CLXC-P single-jet dry type totalizing water
meters are suitable for a range of sub metering
applications. Produced in an ISO9001 certified
production facility, the water meters are con-
structed in conformance with AWWA standard
C712-10, and meet ANSI/NSF 61 for materials
safety and ANSI/NSF 372 for lead free
compliance. Features include:
Availability with or without reed switch
A 50% glass fiber reinforced engineer-
ing thermoplastic material.
A maximum operating pressure of
A nominal accuracy of 1.5%.
An operating flow range from . 22 to 22 GPM.
No Drip Internal Mix
Exair's (Cincinnati, OH) No Drip Internal
Mix Atomizing Nozzles are available in
5 patterns: narrow angle round pattern,
wide angle round pattern, flat fan pattern,
deflected flat fan pattern, and 360° hollow
circular pattern. They are for pressure fed
applications that don't require independent
air and liquid control. Features include:
Adjustability to minimize air and liquid
Interchangeable liquid and air caps.
Hills, MI) new 8700 series
clamp is a light-
tive to traditional
pneumatic toggle and
swing clamps. Features
A construction with
A hard chrome piston
rod, alloy steel pivot pins, and self-
The availability in 4 bore sizes: 25, 32,
40, and 50 mm.
Clamping forces from approximately
45 to 170 lbs., depending on the bore