Amacoil-Uhing (Aston, PA) linear
drives are now available with a
combination shaft wiper/grease fitting.
The addition removes dirt from the
shaft while the drive is running and
simultaneously assures adequate shaft
lubrication with manufacturer-approved grease. Features include:
n A formulated rubber O-ring shaft wiper, mounted in a Delrin
brand plastic fitting.
n One wiper attached to each end of the drive unit.
n A grease fitting filled with molybdenum disulfide-free grease.
To place a Marketplace ad call:
Nick Pinto at 973-920-7745 or
DESIGN & DEVELOPMENT®
Advanced Ceramic Solutions
Astro Met’s unique advanced ceramics
provide cost effective solutions to material
performance problems in a wide range
of demanding applications. “Amalox 68”
a 99.8% alumina ceramic and “Amzirox
86” an yttria stabilized zirconia provided
superior wear resistance, corrosion resistance, high temperature stability, low thermal expansion, high stiffness to weight
ratio, biocompatibility and high dielectric
(513) 772-1242; Fax: (513) 772-9080
E-mail: email@example.com www.astromet.com
Multi-Turn Absolute Encoders
Pepperl+Fuchs (Twinsburg, OH) has
announced its CVM42H CANopen Multi-Turn Absolute Encoders, featuring a
stainless steel housing, flange, and shaft.
The encoders use magnetic sampling to
deliver 24-bit resolution position value
through the CANopen protocol. Features
n Availability with an IP66, IP68, or
IP69K environmental rating.
n Axial and radial shaft load capacity to
n Vibration resistance to 30 g.
n Shock resistance to 300 g.
n An operating temperature range from
-40° to +85°C.
n A resolution of up to 1°.
Waterproof AC Induction Motors
Empire Magnetics (Rohnert Park, CA) has announced its stainless steel
AC induction motors for frequent wetting and washdown environments. The
stainless steel waterproof motors are available in horsepower ranging from . 5
to 20 HP, and nine frame sizes: 56, 143, 145, 182, 184, 213, 215, 254, and
256. Features include:
n Pressure compensation devices.
n Operation at depths up to 2,500 ft.
and pressures in excess of 5,000 PSI.
n High corrosion resistance.
n A double-sealed cable entry.
n An oil-filled motor.