ENC
LO
SURES
&
HARD
W
ARE
OEM/ENGINEERING
Product Design and Development Magazine
· 10mm-300mm stroke
· 6v-12v power supply
· 25kg+ available force
· 15g-100g net weight
MICRO LINEAR ACTUATORS
Make your machine move
ACTUONIX.COM
(Harrisburg, PA) allows design engineers to
create and build their own custom controllers,
rather than settling for an off-the-shelf controller
that doesn’t suit their application needs. A variety
of widths, heights, and configurations yield
a wide range of design options. The custom
controllers feature:
n Ability accommodate up to 60 connection
points in an 18-mm wide package
n Availability in larger widths of 37.6 mm and
75.2 mm
n Housing with two types of plugs for
fast and easy field termination
n Built-in backplane
communication for scalable
design, without
taking up valuable
connection points for
communication
n Accessories including
different cover sizes,
pre-drilled covers for
LEDs, and a rotatable
marking cover
www.phoenixcontact.com
Stafford Manufacturing Corp. (Wilmington, MA) provides
a full line of standard shaft collars in various clamping styles
with a wide choice of bore configurations to meet application
requirements. Stafford Shaft Collars are available in one-
and two-piece, set-screw, hinged, and Accu-Flange mount
designs with smooth round, keyed, square, hex, and UNF,
UNC, and left-or-right hand ACME threaded bores. Features
include:
n Standard shaft collars come in steel, stainless steel, brass,
and aluminum
n Can also include the Accu-Clamp™ feature which
combines a non-marring clamp with a solid working
face that is either
fully machineable or
hardened and ground
n Sizes offered range
from 1/8” to 12” I.D.
n Special modifications
and materials are
available
Self-Clinching Pilot Pins
PEM® self-clinching pilot pins from PennEngineering
(Danboro, PA) are offered in a variety of designs to provide
ideal hardware solutions for positioning, alignment, or pivot
applications. They install in thin metal sheets and become
permanent parts of an assembly. The pin features include:
n PEM Type TPXS™ pins are engineered with a 15º tapered
point to locate and engage the mating hole easily
n Pin and proper captive retention screw will meet ATCA
PICMG 3.0 specification for 3mm alignment pins
n 16mm-long pins are made from 300 Series stainless steel
and will install reliably in aluminum or steel sheets as thin
as .040” / 1mm
n Micro pins for compact consumer electronic assemblies
can be supplied with diameters as small as .040” / 1mm
and in lengths as short as 2mm / .080”
n Pin’s head mounts
flush with the host
panel to promote a
smooth and clean
appearance for the
assembly
www.pemnet.com