Replaceable spring posts and a hardened jaw stop in the transfer
Portescap (West Chester, PA) has introduced the P532 series disc magnet step motor with encoder.
pliant step motors
are an ideal solu-
tion in textile, life
fluid handling, and
A diameter of 52
mm and a length
up to 55 mm.
A rated torque of 0.2 Nm
(boosted up to 0.5 Nm).
An acceleration up to 400,000 rad/sec2.
Programmable S-Track Electric Actuator
Warner Linear (Belvidere, IL) has
expanded its line of S-Track linear
actuators with the addition of a new
programmable model. The program-
mable S-Track actuator is ideally
suited for use in material handling and packaging conveyor
applications where flexibility is important, such as applica-
tions with product and packaging changes to production lines
which require resetting diverter arm opening widths and stops. Features include:
An easy-to-use integrated keypad that allows operators to set and reset end of travel positions as well
as 2 intermediate stops.
A feedback range that automatically adjusts to new end position settings.
12 or 24 VDC switched power operation.
An integral MP150 Metri-Pack 8-pin molded connector that allows several standard input
and output features.
A <56 dB noise level.
A 700-lb max. dynamic and static load rating.
A 16” max. stroke length with end-of-stroke limits.
Koford Engineering (Winchester, OH) has introduced a new line of .63”
( 16 mm) slotless brushless motors. The slotless design provides cog free
motion. Other features include:
A robust .125” ( 3.175 mm) hardened and ground stainless shaft.
Availability in a variety of windings and in either a sensorless
or hall sensor configuration.
A rated output up to 20 W (40 W with heat sinking).
No load speeds up to 53,040 RPM.
A construction of class 220 polyimide insulation
and corrosion resistant materials.
Drive Motor with Ethernet Applied Motion Products
(Watsonville, CA) has announced
the addition of 6 integrated drive
motors to their line of Ethernet and
EtherNet/IP motion control products. The new STM24 models fuse a
high-performance motion controller.
340 ounce inches of torque.
A NEMA23 form factor.
An optional 4000 count/rev optical
An auto tuned digital current control.
An advanced anti-resonance algorithm with electronic damping.
100 megabit Ethernet cabling,
addressing, and protocols.