WI) line of single pis-
ton pumps and com-
pressors are designed
to withstand the most
tions. The versatile
platform design offers
OEMs the ability to
add custom options to
meet or exceed their specific design criteria. Features include:
Air flows to 2. 7 CFM (76.5 l/min).
Pressures to 100 PSI ( 6. 9 bar).
A maximum vacuum to 93% of local barometer (930 mbar).
Diecast aluminum parts that provide a strong, lightweight, and
Low vibration and reduced sound levels.
HPX Rupture Disc Product Family
Continental Disc (Liberty, MO) has announced the newest editions
to its’ HPX Product Family, the HPX-Ta Rupture Disc and the addition of Higher Pressures for the HPX Rupture Disc. The new HPX-Ta
Rupture Disc is a Tantalum semicircular scored reverse acting rupture
disc designed specifically for use in highly corrosive media, such as
bromine, chlorine, HCL, nitric acid, or sulfuric acid. The expanded
pressure ranges in the HPX Rupture Disc are now available in 1” to
3” sizes with burst pressures up to 2,000 PSIG (138 barg).
Benefits of the new HPX-Ta Rupture Disc include:
Lower maintenance cost and greater reliability as compared to
alternate rupture disc types or materials.
Compatibility with the HPX Insert, HPX-PT (pre-torqued), or
HPX Double Disc holders.
Holder corrosion resistance that can be enhanced by Tantalum lining.
Benefits of the expanded pressure ranges include:
Compatibility with HPX Insert, HPX-PT (pre-torqued), or HPX
Double Disc holders.
Certified KR factors of 0.29 for gas/vapor relief or 0.38 for liquid relief.
A durable tapered sealing surface on the holder inlet.
A bubble-tight (no air bubbles detected with leak detection fluid)
metal-to-metal seal between the holder inlet and rupture disc.
AutomationDirect’s (Cumming, GA) line of NITRA pneumatics products
a wide selection of stainless
stand up to
harsh chemicals and wash-down situations. NITRA
be used with
polyurethane, nylon, and PTFE tubing, among others. The bodies of elbow and tee fittings with threaded connections can be
rotated after installation to allow for variations in piping direction.
Availability in NPT inch and BSPT (metric) sizes.
316 stainless steel bodies and 303 stainless steel gripping collets
with internal Viton o-ring.
The ability to withstand pressures up to 290 PSI and
temperatures up to 390°F.
t; 4& 33" 5&%
t;; "#3" 4* 7&;
33792 Doreka Drive
Fraser, MI 48026
FAX (586) 294-6822
Workholding contact points that provide
superior holding power for a variety of
applications. Inch and Metric sizes in
fixed, adjustable and swivel designs.