PEM (Danboro, PA) spinning clinch bolts for use in thin
permanently captivates the screw while allowing it to spin freely
in the sheet. The product line includes Type SCB fasteners
with an unthreaded neck for axial float, Type SCBJ hardware integrating a jacking feature, and Type SCBR versions
with a self-retracting feature enabling the captive screw to
remain retracted when engaged.
All permanently install into aluminum or steel sheets as
thin as .040” / 1.02 mm (and greater) and can be specified for close centerline-to-edge applications.
Ledge Handles with
J. W. Winco (New Berlin, WI) has announced the series GN 430.1 Ledge
Handles with Lettering Block, in metric sizes. Typical applications for these
RoHS-compliant ledge handles include swivel or sliding doors on protective
doors and equipment. They are also suitable for use as drawer handles. Features
Mounting by means of a screw channel.
A minimum screw-in depth of 10 mm.
An aluminum handle.
End caps of technopolymer plastic.
A bright white, age-resistant paper strip and transparent PVH
hard film for the lettering block.
AAA, AA, C and D-Cell Battery Holders
Drip-Free, Reliable Connections Colder (St. Paul, MN) has announced its new NS1 Series quick disconnect couplings. The NS1 provides a secure, reli- able connect and disconnect in a user-friendly, compact footprint. Features include: A non-spill shutoff valve that ensure drip-free disconnects. A dry-break style design that provides ■ ■ ultra-low air inclusion, minimizes contaminants, and eliminates
the need to purge air bubbles from systems.
An intuitive, ergonomic thumb latch.
The ability for tubing to rotate freely without kinking or twisting.
A design constructed from polypropylene and PEEK materials.
Memory Protection Devices, Inc. Memory Protection Devices, Inc.
;)+; -;$&,;0+$- ;;;&&;;!;1;)+;/$,$-;).+;0 ,$- ;
;;;;)!! +,;;;0$ ; $/ +,$- 2;)!;*)*.&;+;,$3 ,;;,- 2& ,;;- +'$(;-$)(,;
)*-$)(,;;( ;;,,)+$ ,;;# ;!;-;$,;;).+;0 ,$- ;! -.+ ,;-#
$( .,-+ 2;,;&;+" ,-;;++;2;)!;;-- + 2;#)& +,;;$(;&. $("; 1- (,$/
' $;&;;( ;'$&$-;+ 2;- 2* ,;
• Engineered designs assure optimum battery tightness
• Low contact resistance • Accepts NiCd, Carbon Zinc, and
Alkaline batteries • Molded of flammability rated high impact
resistant plastic • Broad temperature service range • Molded-in
contacts for PC board wave soldering • 6'' UL-CSA rated wire
• Male/Female 9V snap fastener terminals
For Primary & Stand-By power
and CMOS memory back-up.
Loctite Primer & Adhesive
A new Loctite Primer and Liquid Optically Clear Adhesive (LOCA)
combination from Henkel (Rocky Hill, CT) cures in less than 90
minutes in shadowed areas where light cannot penetrate during
UV cure processes. Formulated for direct bonding, Loctite 7389
Primer and Loctite 3196PR LOCA provide a solution for the cure
through depth limitation of side curing, the work-in-process and
potential damage to the LCD of
heat curing, and the long cure
time required for moisture cure.
A high-tensile and adhesion
strength on polarizer films,
PMMA, glass, and ITO-coated
A reduced potential for MURA
while filling gaps from 200 to
A typical cure time in shadowed
areas of 50 minutes for gaps of
100 microns and 90 minutes for
gaps of 250 microns.