New Products Hardware
RF Test Tool
Saelig (Fairport, NY) has introduced the GA4063 Spectrum Analyzer,
an advanced, high specification instrument for evaluating signals from
9 kHz to 3 GHz. The GA4063 features:
An easy-to-use keypad and soft-key layout.
A large 8. 5" (800 x 480) full-color widescreen TFT LCD display.
A bandwidth resolution that can be set from 1Hz to 3MHz in
A maximum input signal capability of + 30 dBm.
A displayed average noise level specification of -130 dBm
preamplifier off ( 10 MHz 2. 5 GHz); -148 dBm preamplifier on
(- 10MHz 2.5GHz), typical -160 dBm.
Lithium Ion Battery Charger GlobTek (Northvale, NJ) has announced a lithium ion battery charger with multiple redundant safety features to prevent failure and amage to batteries and systems, while mitigating risk, and lengthening battery life. The Glob Tek GT-93023-12012 is a customized bespoke multiple bay battery charger. Features include:
The ability to charge 5 battery packs in unison.
A built-in fuel gauge and protection circuit.
A register to read battery pack and cell temperature.
Digital Low Resistance Ohmmeters
Megger (Norristown, Pa) now offers 3 digital low-resistance ohmmeters
that can test resistance up to 10 A. The DLRO10, DLRO10X, and
DLRO10HD are ideal for use in the utilities, telecom, railroad, aviation, manufacturing, and process control industries. All of the DLRO10
models are in compliance with IEC 61010, and are rated CATIII, 300
V, when used with optional terminal insulating test leads.
The DLRO10 and
Normal, auto, continuous, and high
The ability to measure resistance from
0.1 µΩ to 2,000 Ω
on 1 of 7 ranges.
A 4-terminal resistance
method that shows the
true resistance of the
item under test.
Protection to 600 V
and automatic detection continuity
in potential and current circuits.
An easily visible display.
The DLRO10HD features:
High compliance, as well as user-selectable high or low power ranges.
A power range measuring up to 250 µΩ at 10 A or 2. 5 Ω at 1 A.
A 0.1 µΩ resolution, 0.2% basic accuracy, and a dedicated mode for
use with inductive loads.
5 test modes including normal, automatic, automatic
unidirectional, continuous, and inductive.