NewProducts E L E C
12-bit monolithic sampling analog-to-digital converter (ADC)
that operates at conversion rates of up to
2. 5 giga samples per
second (GSPS). The
product is designed for
analog signals up to the
second Nyquist zone.
■ A 6- or 8-lane
■ Supply voltages of
1.3 and 2. 5 V.
■ 2 independent decimate by 8 or decimate by 16 filters with 10-bit NCOs.
■ A noise spectral density of -150 dBFS/Hz at 2. 5 GSPS.
■ A power consumption of 3. 8 W at 2. 5 GSPS.
Phoenix Contact’s (Middletown, PA) new MINI Pro signal conditioners
save space and make installation and configuration quick for isolation,
conversion, filtering, or
amplification of analog
signals. The compact signal conditioners measure
6. 2 mm wide, so they
require up to 65% less
space than traditional signal conditioner designs.
■ Multiple configuration
options, including DIP
switch, PC programmable, or an Android app.
■ An angled housing.
■ A T-bus power-bridging
■ A voltage range from
9. 3 to 30 VDC.
Railway Sine Wave Inverters
ABSOPULSE Electronics (Canada) has released the RSI 300-IP66 series of railway grade DC-AC sine wave
inverters. These 300 VA microprocessor-controlled, high frequency PWM inverters deliver 115 VAC or 230
VAC continuous at the required frequency. They accept nominal inputs of 48, 72, 96, or 110 VDC
with wide ranges. Line/load regulation is ±3% from no load to full load. Efficiency is typically
80% at full load. Other features include:
■ An IP66 watertight, rugged, dust-proof, diecast aluminum enclosure.
■ A minimum operating temperature range from - 25° to +50°C without derating.
■ A chassis measurement of 360 x 160 x 90 mm ( 14.1 x 6. 3 x 3. 5”).
■ A weight of approximately 4. 6 kg ( 10 lb).
■ Various electronic protections.
Hirose (Simi Valley,
VA) has developed a
that employs a pin-in-hole intrusive reflow method to improve PCB retention
force and enable a one-time
reflow process with other
SMT components. The GT32
■ A 1.5 mm pitch.
■ Enhanced EMI shielding and low near-end crosstalk (NEXT).
■ Resistance to vibration, physical and thermal shock (1,000 cycles from -40° to
+85°C), sulfur dioxide, and heat up to 105°C.
■ A lock strength of 98 N.
■ RoHS and ELV compliance.
■ An operating temperature range from -40° to +105°C.
■ A rated voltage of 30 VAC, rated current of 1 A.
Analog Input & Output Modules
Opto 22 (Temecula, CA) has
released the SNAP-AIMA-iH and SNAP-AOA-23-iH
2-channel analog input
■ 2 isolated
■ LED indicators to provide