Universal Valve Actuator
(Houston, TX )
permits the use of
a single motor and
control software to
operate Valco or
medium speed/medium torque, and high torque versions.
A universal 24 VDC power supply.
CE/RoHS compliance and a variety of interface options including
RS232/485, USB, and BCD.
Ultra-Pure Fluid Applications
(Orangeburg, NY) has
announced a newly designed
2-way PTFE Ball Valve to its
product line. This manually
operated on-off valve is made
of PTFE wetted parts and
Polypropylene structural com-
ponents. PTFE Ball Valves
target corrosive and ultra-pure
fluid applications in laborato-
ries and industrial processing
applications. Features include:
A CV value of 30.
A max operating temperature of 70°C (157°F).
A max operating pressure of 4.1 bar (60 PSIG).
Parker Hannifin (Huntsville, AL) has introduced the FB Series Bellows Valves, a new product
designed for instrumentation applications requiring higher temperatures and pressures in the power
industry. The FB Series Bellows Valve features:
A pressure rating of 2,500 PSIG (414 bar) CWP (cold working pressure).
A secondary packing system that acts as a backup seal above the primary bellows seal.
A packing system that is available in a choice of Grafoil or PTFE.
A 316 stainless steel construction.
A-LOK (double ferrule design) and CPI (single ferrule design) tube compression ports that are
offered in 1/4", 3/8", or 1/2" fractional sizes.
A panel-mountable design.
KNF Neuberger (Trenton, NJ)
has announced the launch of its
NF2.35 liquid micro diaphragm
pump, delivering 235 PSIG continuously and maintenance-free
throughout its entire lifetime.
NF2.35 meets market require-
ments for a small liquid pump
that allows OEM engineers
to use instrument tubing with
increasingly smaller inner diam-
eters, thereby reducing reagent
usage. Features include:
A flow rate of 100 ml/min at 235 PSIG.
A brushless DC motor.
The ability to self-prime, run dry, and be mounted in any direction.
A head constructed of PEEK.
The future-ready ST100 Series
Thermal Mass Air/Gas Flow
Meter from Fluid Components
International (San Marcos, CA)
is now rated for Safety Integrity Level
(SIL) 1 compliant service. The ST100
flow meter has been classified as a
Type B subsystem in accordance to
IEC 61508-1 with a hardware failure
tolerance of zero. The probability of
failure on demand meets SIL-1 capa-
bility standards. Features include:
A graphical, multivariable, backlit
The ability to store up to 5 unique calibrations.
An on-board data logger with an accessible, removable 2-GB
micro-SD memory card capable of storing 21 million readings.
3 different types of flow sensors.
Service up to 850ºF (454ºC).